1-800-663-4209 | Welcome to our new website, found an issue or bug? Please report it here
CN38S-Series
Temperature Autotune Controller with Sensitive Touch Keypad
Models In Stock
- Easy Programming
- Input for Thermocouple, RTD and Thermistor
- Resolution 0.1°C with Automatic Scale Change (Auto-Ranging)
- “Sensitive Touch” Keypad
CN38S-Series
From
$
230.23
Models In Stock
Product Overview
- Accuracy ± 0.5 %
- Accuracy Detail ± (0.5% span ± 1 digit @25 °C
- Additional Features 1 °C or °F programmable
- Category of Overvoltage II
- DC Pulse Isolation: Output NOT isolated as regard the very low voltage parts; Logic State: 1: 12V ± 20% @ 1 mA, 10V ± 20%; @ 20 mA ; Logic State 0: <0.5V
- Device Class Class II
- Display Size 47 mm (1.9 in)
- Display Type 3 Digit LED
- Display Type Note 3-digit single display, red, 12 mm (0.47")
- Display Updating Time 1 s
- Electrical Connection Screw Terminal
- Enclosure Ratings IP65
- Enclosure Ratings Note Front Protection: IP 65 (with gasket) according to EN60070-1 for indoor use Screw Terminal: IP20
- Form factor 1/8 DIN
- Height 78 mm
- Isolation Reinforced isolation between low voltage (input and output relay) and frontal parts; reinforced isolation between low voltage and very low voltage parts (inputs, static outputs)
- Length 64 mm
- Measurement Type Temperature
- Mounting Flush in panel
- Nominal Pulse Voltage 2.5 KV
- Number of Control Outputs 2
- Number of Inputs 1
- Operating Temperature, Max 50 °C
- Operating Temperature, Min 0 °C
- Relative Humidity < 95 RH% without condensation
- Sampling Rate 1 Hz (1 update/second)
- Storage Temperature, Max 60 °C
- Storage Temperature, Min -25 °C
- Weight 180 g
- Width 35 mm
Monitor and control temperature with precision using the CN38S Series controllers. The CN38S Series offers an innovative solution for programming through an ergonomic keypad which uses the technology “Sensitive Touch”. This sensor keyboard guarantees complete protection from dust and liquids in every critical environmental situation. Providing on/off control or PID control with Auto-tune, this controller is the solution for many applications. The CN38S series offers a soft start feature. This function makes it possible to eliminate thermal shock and mechanical stress (due to dilatation) that a system undergoes during start up. In other cases the aim is that of slowing down the increase in temperature in such a way that this can spread itself out evenly inside the material, especially when the machine is equipped with ‘stirrers’ that cannot be started up at room temperature. The CN38S also offers a compressor protection time feature, where some actuators, compressors, and pumps cannot be turned off or turned back on too quickly for their constructive characteristics. To protect the working life of the device it therefore becomes essential to be able to activate a timer that guarantees the minimum time between the switching off of the machine and the following start up.
Read More
PDFs & Manuals
