Cesta  |  Contacto  |  Ayuda  |  Envíe un correo  | 
En Chile 800-395-179
Fuera de Chile001-203-978-7240

Strain Amplifier/Signal Conditioners Modules for Strain Gages, Load Cells and Transducers

DMD-465

Strain Amplifier/Signal Conditioners Modules for Strain Gages, Load Cells and Transducers | DMD-465

USD$465.00 DMD-465

5 años de garantía
  • Bridge Excitation 4 to 15 Vdc up to 120 mA
  • Works with Bridge Circuits of 120 Ohms or Higher
  • Adjustable Gain and Offset
  • 6-Wire Bridge Connections
  • Voltage and Current Output Versions
  • 115, 230 Vac and dc Powered Models

Descripción

The DMD-460 Series bridge amplifiers are self contained, ac or dc powered signal conditioning modules for strain gages, load cells and bridge-type sensors. The DMD 465 contains a precision differential instrumentation amplifier with voltage output. The DMD 465WB is similar, but has a frequency response to 2 kHz. The DMD 466 is similar to the above units, but with a 4 to 20 mA output instead of a voltage output.

SPECIFICATIONS
Common
Power: Standard 115 Vac or optional 220 Vac ±10% 50/60 Hz or 10 to 36 Vdc 0.7 A @ 10V, 0.17 A @ 36V at maximum excitation load
Operating Temperature: 0 to 70°C (32 to 158°F)
Storage Temperature: -25 to 85°C (-13 to 185°F)
Weight: 510 g (18 oz)
Size: 96 L x 51 W x 73 mm H (3.75 x 2 x 2.87")

Bridge Supply
Excitation Voltage Range: 4 to 15 Vdc
Current Output: 120 mA max
Line and Load Regulation: (0 to 100 mA) 0.05% max
Output Noise: 0.5 mVrms

Voltage Output, DMD-465 and DMD-465WB
Gain Range: 40 to 250 (up to 1000 with external resistor on DMD-465 only)
Dynamic Response:
   DMD-465: DC to -3 dB = 3 Hz
   DMD-465WB: DC to -3 dB = 2 kHz
Max Output (2 kΩ Load): ±10 Vdc
Output Impedance: 0.01 to 1 Ω
Output Offset: -5 to 2V (DMD-465WB only)
Gain Temp Coefficient: 200 ppm/°C
Input Bias Current: 30 nA
Input Impedance: 3000 MΩ
Output Noise (RTO): @ gain = 100
   DMD-465: 120 µVrms
   DMD-465WB: 1 Hz to 2 kHz = 2 mV
Input Noise Line Frequency: 15 µV p-p
Common-Mode Rejection: 90 dB @ gain 40, 100 dB @ gain 250
Common-Mode Input Voltage: ±15V

4 to 20 mA Transmitter DMD-466
Output: 4 to 20 mA, 0 to 20 mA
Input Range for 20 mA Output: 10 mV min, 50 mV max
Zero Adjust: 0 to ±12 mA
Linearity: ±0.05% FS
Temperature Stability: 200 ppm/°C
Input Impedance: 1000 MΩ
Common-Mode Rejection: 90 dB
Common-Mode Input Voltage: ±15V
Compliance Voltage: 10 Vdc
Output Noise: 1 µA rms @ gain 0.2 mA/mV, 1 to 100 Hz
Dynamic Response: DC to -3 dB = 3 Hz
Response Time:
   200 ms: to 99% of final value, typical
   300 ms: to 99.9% of final value, typical
Hacer Pedido(Especifique el Número de Modelo)

Lo que han comprado otras personas: Cuando vea este icono, haga clic sobre él para abrir la lista de productos que otras personas han comprado al adquirir este modelo

Número de parte/Desc.
Cant.
Descripción
Quick Ship
Haga clic para abrir la lista de productos que otras personas han comprado al adquirir este modeloDMD-465
DMD-465
USD$465.00
Disponible en: 2 Semanas
 
Strain gage amplifier with voltage output and 110 Vac power
Quick Ship
  
DMD-465-220V
Consultar venta  
Disponible en: 
 
 
Strain gage amplifier with voltage output and 220 Vac power
Quick Ship
Haga clic para abrir la lista de productos que otras personas han comprado al adquirir este modeloDMD-465WB
DMD-465WB
USD$465.00
Disponible en: Disponible
 
High frequency strain gage amplifier with voltage output and 110 Vac power
Quick Ship
  
DMD-465WB-220V
Consultar venta  
Disponible en: 
 
 
High frequency strain gage amplifier with voltage output and 220 Vac power
Quick Ship
Haga clic para abrir la lista de productos que otras personas han comprado al adquirir este modeloDMD-466
DMD-466
USD$465.00
Disponible en: Disponible
 
Strain gage amplifier with 4-20 mA output and 110 Vac power
Quick Ship
  
DMD-466-220V
Consultar venta  
Disponible en: 
 
 
Strain gage amplifier with 4-20 mA output and 220 Vac power
Quick Ship
Haga clic para abrir la lista de productos que otras personas han comprado al adquirir este modeloDMD-466-DC
DMD-466-DC
USD$525.00
Disponible en: Disponible
 
Strain gage amplifier with 4-20 mA output and 10-36 Vdc power
Accessories
Quick Ship
Haga clic para abrir la lista de productos que otras personas han comprado al adquirir este modeloDIN400
DIN400
USD$36.44
Disponible en: Disponible
 
DIN Rail Mounting Kit
Quick Ship
  
POWER CORD-SE
USD$7.65
Disponible en: Disponible
 
AC Power cord with stripped end termination
Todos los productos en este sitio se muestran en la moneda de EE.UU.
Ejemplo de pedido: (1) DMD-465WB is a wide bandwidth amplifier/signal conditioner module, with 115 Vac power., USD$465.00

Manuales de Productos:

Descargar DMD-465 - Bridge Sensor AC Powered Signal Conditioner
Descargar DMD-465WB - Bridge Sensor AC Powered Signal Conditioner
Descargar DMD-466 Bridge Sensor - AC Powered Signal Conditioner