Cesta  |  Contacto  |  Ayuda  |  Envíe un correo  | 
En Chile 800-395-179
Fuera de Chile001-203-978-7240

Clamp-On Ultrasonic Energy Flow Meter

FDT-40E Series

Clamp-On Ultrasonic Energy Flowmeter
 | FDT-40E Series

Clamp-On Ultrasonic Energy Flowmeter

USD$3,606.00 FDT-40E

1 año de garantía CE
  • Bi-Directional Flow/Energy Measurement
  • Rugged, Aluminum Enclosure
  • Rate and Total Backlit Display
  • 4 to 20 mA and Dual Alarm Outputs
  • USB Programming Port
  • RS485 MODBUS® Network Connection

Descripción

FDT-40E Series ultrasonic flow and energy meters clamp on to the outside of pipes and do not come in contact with the internal liquid. The technology has inherent advantages over alternate devices including: low-cost installation, no pressure head loss, no moving parts to maintain or replace, no fluid compatibility issue, and a large, bi-directional measuring range that ensures reliable readings even at very low and high flow rates. FDT-40E Series is available in a variety of configurations that permit the user to select a meter with features suitable to meet particular application requirements.

Specifications
System
Liquid Types: Most clean liquids or liquids containing small amounts of suspended solids or gas bubbles
Velocity Range: Bi-directional to greater than 40 FPS (12 MPS)
Flow Accuracy:
    Larger Than 50 mm (2"): ±1% of reading or ±0.01 FPS (0.003 MPS), whichever is greater
    25 to 50 mm (1 to 2"): ±1% of reading or ±0.04 FPS (0.012 MPS), whichever is greater
    19 mm (¾") and Smaller: ±1% of full scale
Temperature Accuracy:
    Absolute: 0.25°C (0.45°F)
    Difference: 0.1°C (0.18°F)
Energy Temperature Range: 0 to 100°C (32 to 212°F)
Sensitivity Flow: 0.001 FPS (0.0003 MPS)
Temperature: 0.025°C (0.05°F)
Repeatability: 0.5% of reading Transmitter
Power Requirements (AC): 95 to 264 Vac 47 to 63 Hz @ 17 VA maximum standard, 20 to 28 Vac 47 to 63 Hz @ 0.35 A maximum (“-24VAC” models), 10 to 28 Vdc @ 5 W maximum (“-VDC” models)
Protection: Auto resettable fuse, reverse polarity and transient suppression
Display: Two line LCD, LED backlit; top row 18 mm (0.7") height, 7-segment; bottom row 9 mm (0.35") height, 14-segment
Icons: RUN, PROGRAM, RELAY1, RELAY2
Flow Rate Indication: 8-digit positive, 7-digit negative maximum; auto decimal, lead zero blanking
Flow Totalizer: 8-digit positive, 7-digit negative maximum (re-set via keypad press, software, network command or momentary contact closure
Enclosure NEMA 4 (IP65) Construction: Powder-coated aluminum, polycarbonate, stainless steel, polyurethane, nickel-plated steel mounting brackets
Size (Electronic Enclosure Only): 152 W x 112 H x 56 mm D (6.0 x 4.4 x 2.2")
Conduit Holes: (2) ½ NPT female (1) ¾ NPT female
Temperature: -40 to 85°C (-40 to 185°F)
RTD: Platinum 385, 1000O, 3-wire
Configuration: Via optional keypad or PC running software (Note: not all configuration parameters are available from the keypad – i.e. flow and temperature calibration and advanced filter settings)
Engineering Units Flow Meter: Feet, gallons, cubic feet, million gallons, barrels (liquid and oil), acre-feet, lbs, meters, cubic meters, liters, million liters, kg
Engineering Units Energy Meter: BTU, MBTU, MMBTU, Tons
Inputs/Outputs USB 2.0: For connection of a PC running configuration utility
    RS485: MODBUS RTU command set
    4 to 20 mA: 12-bit, internal power, can span negative to positive flow/energy rates
Transducers
Construction
    Standard (FDT-41 thru 46): NEMA 6 (IP67), PVC, PEI, Nylon cord grip, PVC cable jacket
    Temperature: -40 to 60°C (-40 to 140°F)
    FDT-41 thru 46 with “-HT” option, FDT-47 and FDT-48: NEMA 6 (IP67), CPVC, PEI, Nylon cord grip, PVC cable jacket
    Temperature: -40 to 90°C (-40 to 194°F)
    FDT-47 “-HT”: NEMA 6 (IP67), PTFE, polyimide, Nickel-plated brass cord grip, PFA cable jacket
    Temperature: -40 to 176°C (-40 to 350°F)
Frequency:
    FDT-41 thru 46: 2 MHz
    FDT-47: 1 MHz
    FDT-48: 500 KHz
Cables: RG59 coaxial, 75 Ω or twin axial, 78 Ω (optional armored conduit)
Cable Length: Standard 6 m (20') [300 m (990') maximum in 3 m (10') increments; submersible conduit limited to 30 m (100') for transducers]
Software Utilities Utilized to configure, calibrate and troubleshoot flowmeters. Connection via USB A/B cable; software is compatible with Windows 2000, Windows XP, Windows Vista® and Windows® 7
RS485 Network All FDT-40 meters come equipped with RS485 drivers and utilize a MODBUS RTU command set (data can be returned in single-precision, doubleprecision, integer or floating point values). Up to 126 units products can be run on a single daisy-chain network and be individually queried for flow rate, positive flow accumulator, negative flow accumulator and signal strength. Flow accumulators can be cleared at discrete addresses or globally. The RS485 network is also compatible with direct to Excel, application.
Hacer Pedido(Especifique el Número de Modelo)

Lo que han comprado otras personas: Cuando vea este icono, haga clic sobre él para abrir la lista de productos que otras personas han comprado al adquirir este modelo

Número de parte/Desc.
Cant.
Descripción
Quick Ship
  
FDT-40E
USD$3,606.00
Disponible en: 4 Semanas
 
Energy flowmeter display 95 to 264 Vac, temperature range 0 to 100°C (32 to 212°F)
Quick Ship
  
FDT-40E-VDC
USD$3,469.00
Disponible en: 4 Semanas
 
Energy flowmeter display 10 to 28 Vdc, temperature range 0 to 100°C (32 to 212°F)
Quick Ship
  
FDT-40E-24VAC
USD$3,606.00
Disponible en: 3 Semanas
 
Energy flowmeter display 24 Vac, temperature range 0 to 100°C (32 to 212°F)
Quick Ship
  
FDT-40E-HT
USD$3,606.00
Disponible en: 4 Semanas
 
Energy flowmeter display 95 to 264 Vac, temperature range -40 to 177°C (-40 to 350°F)
Quick Ship
  
FDT-40E-VDC-HT
USD$3,469.00
Disponible en: 3 Semanas
 
Energy flowmeter display 10 to 28 Vdc, temperature range -40 to 177°C (-40 to 350°F)
Quick Ship
  
FDT-40E-24VAC-HT
USD$3,606.00
Disponible en: 3 Semanas
 
Energy flowmeter display 24 Vac, temperature range -40 to 177°C (-40 to 350°F)
Accessory Remote Transducers (Display Sold Separately)
Remote Transducers for ANSI Pipe (Display Sold Separately)
Quick Ship
  
FDT-41-ANSI
Consultar venta  
Disponible en: 
 
 
Transducer for 1/2" ANSI pipe
Quick Ship
  
FDT-42-ANSI
USD$681.75
Disponible en: Disponible
 
Transducer for 3/4" ANSI pipe
Quick Ship
  
FDT-43-ANSI
Consultar venta  
Disponible en: 
 
 
Transducer for 1" ANSI pipe
Quick Ship
  
FDT-44-ANSI
Consultar venta  
Disponible en: 
 
 
Transducer for 1 1/4" ANSI pipe
Quick Ship
  
FDT-45-ANSI
USD$739.88
Disponible en: 4 Semanas
 
Transducer for 1 1/2" ANSI pipe
Quick Ship
Haga clic para abrir la lista de productos que otras personas han comprado al adquirir este modeloFDT-46-ANSI
FDT-46-ANSI
USD$792.72
Disponible en: 4 Semanas
 
Transducer for 2" ANSI pipe
Remote Transducers for Copper Pipe (Display Sold Separately)
Quick Ship
  
FDT-41-CP
Consultar venta  
Disponible en: 
 
 
Transducer for 1/2" Copper pipe
Quick Ship
  
FDT-42-CP
USD$681.75
Disponible en: Disponible
 
Transducer for 3/4" Copper pipe
Quick Ship
  
FDT-43-CP
Consultar venta  
Disponible en: 
 
 
Transducer for 1" Copper pipe
Quick Ship
  
FDT-44-CP
Consultar venta  
Disponible en: 
 
 
Transducer for 1 1/4" Copper pipe
Quick Ship
  
FDT-45-CP
Consultar venta  
Disponible en: 
 
 
Transducer for 1 1/2" Copper pipe
Quick Ship
  
FDT-46-CP
Consultar venta  
Disponible en: 
 
 
Transducer for 2" Copper pipe
Remote Transducers for Tubing (Display Sold Separately)
Quick Ship
  
FDT-41-TUBE
Consultar venta  
Disponible en: 
 
 
Transducer for 1/2" tubing
Quick Ship
  
FDT-42-TUBE
Consultar venta  
Disponible en: 
 
 
Transducer for 3/4" tubing
Quick Ship
  
FDT-43-TUBE
Consultar venta  
Disponible en: 
 
 
Transducer for 1" tubing
Quick Ship
  
FDT-44-TUBE
Consultar venta  
Disponible en: 
 
 
Transducer for 1 1/4" tubing
Quick Ship
  
FDT-45-TUBE
Consultar venta  
Disponible en: 
 
 
Transducer for 1 1/2" tubing
Quick Ship
  
FDT-46-TUBE
Consultar venta  
Disponible en: 
 
 
Transducer for 2" tubing
Remote Transducers (Display Sold Separately)
Quick Ship
Haga clic para abrir la lista de productos que otras personas han comprado al adquirir este modeloFDT-47
FDT-47
USD$877.28
Disponible en: Disponible
 
Transducer for 2 to 24" pipe
Quick Ship
  
FDT-47-100FT
USD$1,122.00
Disponible en: 4 Semanas
 
Transducer for 2 to 24" pipe with 100 ft of cable
Quick Ship
  
FDT-47-HT
USD$3,436.00
Disponible en: 6 Semanas
 
High temperature transducer for 2 to 24" pipe
Quick Ship
  
FDT-47-HT-100FT
USD$3,680.00
Disponible en: 6 Semanas
 
High temperature transducer for 2 to 24" pipe with 100 ft of cable
Quick Ship
  
FDT-48
USD$1,407.00
Disponible en: 6 Semanas
 
Transducer for pipes over 24"
Quick Ship
  
FDT-48-100FT
USD$1,655.00
Disponible en: 6 Semanas
 
Transducer for pipe over 24" with 100 ft of cable
Accessories
Quick Ship
  
FDT-40-PC-CABLE
USD$58.14
Disponible en: Disponible
 
Optional USB PC programming cable
Quick Ship
  
FDT-40-CABLE GLAND
USD$26.91
Disponible en: Disponible
 
Optional cable gland
Quick Ship
  
FDT-40-BHC
USD$71.22
Disponible en: 3 Semanas
 
Brad Harrison connector for the FDT-40 Series
Quick Ship
  
FDT-40-RTDCONN
USD$84.57
Disponible en: 3 Semanas
 
RTD Pig Tail (connection adapter)
Quick Ship
  
FDT-40-RTD1
USD$581.34
Disponible en: 4 Semanas
 
RTD kit, clamp-on, 130C, 1000Ω 6.1 m (20')
Quick Ship
  
FDT-40-RTD2
USD$729.30
Disponible en: Disponible
 
RTD kit, clamp-on, 200C, 1000Ω 6.1 m (20')
Quick Ship
  
FDT-40-RTD3
USD$1,069.00
Disponible en: 3 Semanas
 
RTD kit, insertion, 3 x 1/4", 126C, 1000Ω Platinum RTD
Quick Ship
Haga clic para abrir la lista de productos que otras personas han comprado al adquirir este modeloFDT-GREASE
FDT-GREASE
USD$52.49
Disponible en: Disponible
 
Replacement acoustic couplant 150 g (5.3 oz)
Quick Ship
  
FDT-HT-GREASE
USD$129.76
Disponible en: Disponible
 
High temperature acoustic couplant 56 g (2 oz)
Quick Ship
Haga clic para abrir la lista de productos que otras personas han comprado al adquirir este modeloFDT-NS-GREASE
FDT-NS-GREASE
USD$52.49
Disponible en: 4 Semanas
 
Non-silicone acoustic couplant 79 g (2.8 oz)
Todos los productos en este sitio se muestran en la moneda de EE.UU.
NOTA: Comes complete with operator’s manual. Transducers come with mounting gel.

Transducers sold separately.


Generador de Número de Parte

Generador de Número de parte
Descripción de Opciones:


(1) Pipe and Tubing Sizes seleccionar de:
41 para 1/2 Inch
42 para 3/4 Inch
43 para 1 Inch
44 para 1 1/4 Inch
45 para 1 1/2 Inch
46 para 2 Inch
47 para 2 to 24 Inch
48 para Pipes over 24 inch

(2) Pipe and Tubing Material seleccionar de:
ANSI para ANSI pipe
CP para Copper pipe
TUBE para Plastic tubing

(3) High Temperature seleccionar de:
Nada (dejar el campo en blanco) para None
-HT para High temp transducers

(4) Cable Length seleccionar de:
Nada (dejar el campo en blanco) para Standard 6 m (20 feet)
-100FT para 30 m (100 feet)
NOTA: No todas las combinaciones pueden no ser válidas, compruebe la hoja de especificaciones para números de parte válidos.
We noticed you are from the US. Visit your local site for regional offers and live support.