Cesta  |  Contacto  |  Ayuda  |  Envíe un correo  | 
En Chile 800-395-179
Fuera de Chile001-203-978-7240

Conductivity Level Controllers

LVCN4000 Series

Conductivity Level Controllers | LVCN4000 Series

Conductivity Level Controllers

Ver Todas los Modelos Abajo

1 año de garantía CE
  • Accurate and Reliable Measurement
  • Easy Economical Installation
  • Rugged Construction
  • No Moving Parts
  • 100 to 2,000 mm (0.33 to 6.5') Rod Lengths Available
  • Rod Can be Cut in the Field
  • ECTFE/ETFE Coating Available

Descripción

The LVCN4000 Series Conductive Level Switch Controllers offer a wide range of customized options to meet any application’s need. LVCN4000 Series are designed to control the level of all conductive mediums with up to 2 different points of level control.

The LVCN4100 Series has one single rod and is able to control one point of level. The LVCN4200 Series can accommodate up to two rods and is able to control two points of levels. Both models feature a 24 Vdc-power supply and internal relay that replaces the need for an external relay. As with all other conductive probes, the rods for these two models can be custom cut and made with any process connection, such as threaded or sanitary. In addition, the electrodes operate with alternate current to prevent electrolyses.

SPECIFICATIONS
Power Supply: 24 Vdc (±10%)
Current Consumption: Max 2 VA
Temperature Range:
316 SS: -10 to 82°C (-14 to 180°F)
ECTFE/ETFE Coating: -10 to 120°C (-14 to 248°F)
Max Pressure: 290 psi (20 bar)
Wetted Materials: 316 SS
Enclosure Material: Glass-filled nylon standard, aluminum optional
Electrical Connection: Cable entry and ½ NPT conduit
Process Connection: ½, ¾, 1, 1½ NPT; tri-clamp or flange
Output: 5 A SPDT relay (250 Vac max)
Time Delay: 0.1 to 5 seconds nominal
Sensitivity Adjustment: 0.5 to 50 kΩ (potentiometer)
Electrodes: 316 SS
Electrode Length: 100 to 2000 mm (3.9" to 6.5')
Weight: Approx. 2.7 kg (6 lb) for 1.2 m (4')
Protection Class: NEMA 4 (IP65)
Hacer Pedido(Especifique el Número de Modelo)

Lo que han comprado otras personas: Cuando vea este icono, haga clic sobre él para abrir la lista de productos que otras personas han comprado al adquirir este modelo

Número de parte/Desc.
Cant.
Descripción
Quick Ship
  
LVCN4121-48-ETFE
USD$774.76
Disponible en: 8 Semanas
 
1 rod, 3/4 NPT, 48" L, ECTFE/ETFE coated, max temp 120°C (248°F), glass filled nylon enclosure with 1/2 NPT conduit and cable gland
Quick Ship
  
LVCN4122-48-ETFE
USD$887.64
Disponible en: 8 Semanas
 
1 rod, 3/4 NPT, 48" L, ECTFE/ETFE coated, max temp 120°C (248°F), aluminum die cast enclosure with 1/2 NPT conduit entry
Quick Ship
  
LVCN4231-36-48-ETFE
USD$1,125.00
Disponible en: 8 Semanas
 
2 rods, 1 NPT, 36" L rod and 48" L rod, ECTFE/ETFE coated, 120°C (248°F), glass filled nylon enclosure with 1/2 NPT conduit and cable gland
Quick Ship
  
LVCN4232-48-ETFE
USD$1,340.00
Disponible en: 8 Semanas
 
2 rods, 1 NPT, 2 - 48" L rods, ECTFE/ETFE coated, 120°C (248°F), aluminum die cast with 1/2 NPT conduit entry
Accessories
Quick Ship
Haga clic para abrir la lista de productos que otras personas han comprado al adquirir este modelo70A-1
70A-1
USD$28.56
Disponible en: 1 Semana
 
Continuous tone alarm
Quick Ship
Haga clic para abrir la lista de productos que otras personas han comprado al adquirir este modeloTX4-100
TX4-100
USD$38.45
Disponible en: Disponible
 
30.5 m (100') spool of 4 conductor wire
Quick Ship
Haga clic para abrir la lista de productos que otras personas han comprado al adquirir este modeloPSU-93
PSU-93
USD$53.16
Disponible en: Disponible
 
Unregulated 24 Vdc Power Supply

Ordenar Por Número de Parte

Número de parte
Cant.
Número de parte
Cant.


Todos los productos en este sitio se muestran en la moneda de EE.UU.
NOTA: Comes complete with operator’s manual.

Custom models* are available, see Part Number Builder (below) for the most common configurations. Consult Omega Flow Engineering for a quote on over custom versions.

* Rods must be coated when using the probes above 82°C (180°F). All conductive applications must have a reference point, such as a metallic tank wall or another rod for non-metallic tanks.


Generador de Número de Parte

Generador de Número de parte
Descripción de Opciones:


(1) No. of Sensing Rods seleccionar de:
LVCN41 para single rod
LVCN42 para dual rods

(2) Process Connection seleccionar de:
1 para 1/2 NPT thread
2 para 3/4 NPT thread
3 para 1 NPT thread
4 para 1-1/2 NPT thread
5 para 1-1/2" Tri-Grip Sanitary
6 para 2" flange ANSI 15016 316SS

(3) Enclosure seleccionar de:
1 para glass-filled nylon with 1/2 NPT conduit and cable gland
2 para aluminum die cast with 1/2 NPT conduit entry
3 para aluminum die cast with cable gland

(4) Length seleccionar de:
C para specify rod length
inches (96" max)

(5) Other Options seleccionar de:
Nada (dejar el campo en blanco) para none
ETFE para ECTFE/ETFE coating
NOTA: No todas las combinaciones pueden no ser válidas, compruebe la hoja de especificaciones para números de parte válidos.
We noticed you are from the US. Visit your local site for regional offers and live support.