RS485 Output Silicon Pressure Transmitter

PX409-485_PXM409-485

RS485 Output Pressure Transmitter

Ver Todas los Modelos Abajo

HACER PEDIDO

Up to 640 Readings/Second
Micro-Machined Silicon Sensor
316L SS Wetted Parts
High ±0.08% BSL Accuracy
RS485 and Analog Outputs
Excellent Long Term Stability
M12 Connection
Ruggedized with Secondary Containment

Descripción

FREE OMEGA™ Downloadable Software!
Free OMEGA PC software takes the data from the transmitter directly to the digital domain, turning your laptop or Windows® tablet into a virtual meter, chart recorder, or data logger. Also included are .NET APIs and a command set for command-line access.
Download your free copy today!
Note: RS485 to PC interface is required, sold separately

See the Digital Transducer Software in Action

Charting Window – The addition of a charting window allows you to see your data graphed in real time. The Y axis is configurable to allow simultaneous graphing of multiple engineering units. You can output the image of your data to a png file.

Channels Window - Display data from all of your sensors simultaneously. Each channel has configurable user alarms, three data filters, tare, resettable low/high indication, and sample rates ranging from 30 minutes to 640Hz.

Logging Window – A new xls filetype output option presents preformatted data for readability. In addition, Live Statistics are displayed, including the sensor information, the start/stop time, the number of samples taken, the current reading, and the High/Low readings. With the logging window, you can capture your data for later analysis.

The PX409 RS485 Series is an industrial RS485 Silicon Pressure sensor. Use stand-alone for up to 640 Hz sampling rate, or connect up to 16 units in an independent multidrop RS485 network at 1 Hz overall bus sampling rate. Interface to the sensor using command line access, or use OMEGA’s Free PC software to chart, log, display, and output data for analysis. An additional analog output (0 to 5V, or 4 to 20 mA) provides even more flexibility. The micro-machined silicon design is ideal for pressure or level applications in laboratory, test platforms, or bio/pharmaceutical applications as well as industrial applications that require a rugged, high accuracy transmitter that can transmit over long distances. The micro-machined silicon sensor provides a very stable transmitter with exceptional high accuracy of ±0.08% and a broad compensated range of -29 to 85°C (-20 to 185°F). The modular construction allows for fast delivery of most configurations and fittings.

WIRING CODE
CONNECTOR PIN	COLOR	CONNECTION
1	GREEN	+ V out ANALOG
2	RED	+ SUPPLY
3	BLUE	(B) RS485
4	BROWN	(A) RS485
5	BLACK	- SUPPLY
6	WHITE	-V out ANALOG
7	N/C	NO CONNECTION
8	SHIELD	SHIELD

SPECIFICATIONS
Supply: 12 to 36 Vdc (when using mA output, derate using formula in operating temperature section)
Maximum Loop Ω: (Supply-9) x 50
Accuracy: 0.08% BSL (linearity, hysteresis and repeatability combined)
Resolution: Up to 5.5 significant figures
Zero Balance: ±0.5% FS typical 1% maximum (1% typical, 2% maximum for 2.5 psi and below)
Span Setting: ±0.5% FS typical 1% maximum (1% typical, 2% maximum for 2.5 psi and below). Calibrated in vertical direction with fitting down
Temperature Compensation (Over Compensated Range):
    Span: Range > 5 psi: ±0.5%; Range ≤ 5 psi: ±1.0%
    Zero: Range > 5 psi: ±0.5%; Range ≤ 5 psi: ±1.0%
Minimum Isolation: 100 MΩ @ 50 Vdc case to sensor, 2 MO @ 50 Vdc case to output terminations
Pressure Cycles: 1 million, minimum
Long Term Stability (1-Year): ±0.1% full scale typical
Power Consumption
  -5V: 0.65 W typical
  -I: 1.25 W maximum
Secondary Containment
  Gage/Vacuum/Compound Pressure:
    10 inH2O to 5 psi: to 1000 psi
    15 to 1000 psi: to 3000 psi
    1500 to 5000 psi: to 10,000 psi
  Absolute/Barometric Pressure:
    5 to 1000 psia: to 6000 psia
    1500 to 5000 psia: to 10,000 psia
Overpressure
  Gage/Vacuum/Compound Pressure:
    10 inH2O: 10 times span
    1 psi: 6 times span
    2.5 psi to 1000 psi: 4 times span
    1500 psi to 5000 psi: 7250 psi maximum
  Absolute/Barometric Pressure:
    5 psia: 6 times span
    15 psia to 1000 psia: 4 times span
    1500 to 5000 psia: 7250 psia maximum
Secondary Containment
  Gage/Vacuum/Compound Pressure:
    25 to 350 mb: to 70 bar
    1 to 70 bar: to 200 bar
    100 to 350 bar: to 700 bar
  Absolute/Barometric Pressure:
    350 mb to 70 bar: to 400 bar
    100 to 350 bar: to 700 bar
Overpressure
  Gage/Vacuum/Compound Pressure:
    25 mb: 10 times span
    70 mb: 6 times span
    170 mb to 100 bar: 4 times span
    175 to 350 bar: 500 bar maximum
  Absolute/Barometric Pressure:
    350 mb to 100 bar Absolute: 4 times span
    175 to 350 bar Absolute: 500 bar maximum
Wetted Parts: 316L stainless steel
Weight: 200 g (7 oz)
Operating Temperature Range: -40 to 85°C (-40 to 185°F); when using mA output; maximum ambient temperature = 106 + (0.038) R-(2.1)V where R = Loop Ω and V = Vsupply
Compensated Temperature
  Imperial:
    Ranges >5 psi: -29 to 85°C (-20 to 185°F)
    Ranges ≤5 psi: -17 to 85°C (0 to 185°F)
  Metric:
    Ranges > 350 mb: -29 to 85°C (-20 to 185°F)
    Ranges ≤ 350 mb: -17 to 85°C (0 to 185°F)
Pressure Port:
  Imperial: ¼–18 NPT male
  Metric: G-¼ male
A to D Conversion: 24-bit
Output: RS485 digital with discrete analog (choose 0 to 5 Vdc or 4 to 20 mA)
DAC Conversion: 300 Hz at 16 bit
Bandwidth:
  Multidrop Mode: Overall Bus rate: DC to 1 update per second typical
  Standalone Mode: DC to 640 updates per second
ESD Protection: Tested to 4 kV to case and shielded wire
  Digital Outputs: Protection device rated to ±13 kV
  Analog Output: Protection device rated:
    Contact: ±8 kV min, ±30 kV max
    Air: ±15 kV min, ±30 kV max
Electrical Termination: 8-pin M12 type A male with shield pin connection (IEC61076-2-101); female M12 connector M12.8-S-F-FM with screw terminals sold separately
CE Compliant:
  Emissions: Meets industrial EN61326.
  Susceptibility (10 V/m): Digital: ±0.009%, 0 to 5 Vdc: ±0.18%, 4 to 20 mA: ±0.006%; tested using 7.6 m (25') shielded 6 conductor cable
Environmental Protection: IP65
RS485 (Non-Isolated):
  Protocol: OMEGA command structure (provided), addressable or non addressed stand-alone
  Unit Load: 1/8
  Standalone and Addressed Multidrop Modes Recommended Cable: Belden 9843 or equivalent
  For Stated EMC Performance: Tie drain wire to shield connection on PX409-485 side, and tie drain to earth ground on supply side
  Maximum Number of Units on One RS485 Bus: 16 units software-enabled 120Ω termination resistor

Hacer Pedido(Especifique el Número de Modelo)

Lo que han comprado otras personas: Cuando vea este icono, haga clic sobre él para abrir la lista de productos que otras personas han comprado al adquirir este modelo

Número de parte/Desc.

Cant.

Descripción

Imperial Models with RS485 and 0 to 5 Vdc or 4 to 20 mA Analog Output

PX459-005G485-5V

USD$914.50

Disponible en: 3 Semanas

0 to 5 psi Gage pressure range with RS485 and 0 to 5 Vdc output, M12 electrical connection

PX459-005G485-I

USD$914.50

Disponible en: 3 Semanas

0 to 5 psi Gage pressure range with RS485 and 4 to 20 mA output, M12 electrical connection

PX459-015G485-5V

USD$914.50

Disponible en: 3 Semanas

0 to 15 psi Gage pressure range with RS485 and 0 to 5Vdc output, M12 electrical connection

PX459-015G485-I

USD$914.50

Disponible en: 3 Semanas

0 to 15 psi Gage pressure range with RS485 and 4 to 20 mA output, M12 electrical connection

PX459-050G485-5V

USD$914.50

Disponible en: 3 Semanas

0 to 50 psi Gage pressure range with RS485 and 0 to 5 Vdc output, M12 electrical connection

PX459-050G485-I

USD$914.50

Disponible en: 3 Semanas

0 to 50 psi Gage pressure range with RS485 and 4 to 20 mA output, M12 electrical connection

PX459-1.0KG485-I

USD$914.50

Disponible en: 3 Semanas

0 to 1000 psi Gage pressure range with RS485 and 4 to 20 mA output, M12 electrical connection

PX459-030A485-5V

USD$914.50

Disponible en: 3 Semanas

0 to 30 psi Absolute pressure range with RS485 and 0 to 5Vdc output, M12 electrical connection

PX459-030A485-I

USD$914.50

Disponible en: 3 Semanas

0 to 30 psi Absolute pressure range with RS485 and 4 to 20 mA output, M12 electrical connection

PX459-150A485-5V

USD$914.50

Disponible en: 3 Semanas

0 to 150 psi Absolute pressure range with RS485 and 0 to 5 Vdc output, M12 electrical connection

PX459-150A485-I

USD$914.50

Disponible en: 5 Semanas

0 to 150 psi Absolute pressure range with RS485 and 4 to 20 mA output, M12 electrical connection

Accessories

M12.8-S-F-FM

USD$35.76

Disponible en: Disponible

The M12 connectors can be attached to existing sensor or extension cables with a 6 to 8 mm cable diameter in the field by means of screw type connections

CN7-485-USB-1

Consultar venta

Disponible en:

Mini-node communication signal converter changes RS485 to USB

CA-6PC24-1-030-RS485

USD$222.65

Disponible en: 4 Semanas

30ft, 6 Conductor, M12 cable assembly for RS485

† Todos los productos en este sitio se muestran en la moneda de EE.UU.
NOTA: Comes complete with 5-point NIST-traceable calibration and free downloadable software.

Alternate pressure types and electrical output connections for this family of products will be added soon - please contact a sales representative for alternative configurations to meet your needs!

Ejemplo de pedido: (1) M12.8-S-F-FM Mating connector, USD$35.76 plus (1) PX459-100G485-5V 0 to 100 psi Absolute pressure range with RS485 and 0 to 5 Vdc output, M12 electrical connection, USD$914.50, USD$35.76 + 914.50 = USD$950.26

Generador de Número de Parte

Generador de Número de parte

(1)		(2)	(3)	(4)
	-

Descripción de Opciones:

(1) Electrical Termination seleccionar de:
PX459 para Imperial for M12 Connector
PXM459 para Metric for M12 Connector

(2) Range - Not all ranges are available for every pressure type seleccionar de:
10W para Imperial Pressure 0 to 10 inH2O
001 para Imperial Pressure 0 to 1 psi
2.5 para Imperial Pressure 0 to 2.5 psi
005 para Imperial Pressure 0 to 5 psi
015 para Imperial Pressure 0 to 15 psi
030 para Imperial Pressure 0 to 30 psi
050 para Imperial Pressure 0 to 50 psi
100 para Imperial Pressure 0 to 100 psi
150 para Imperial Pressure 0 to 150 psi
250 para Imperial Pressure 0 to 250 psi
500 para Imperial Pressure 0 to 500 psi
750 para Imperial Pressure 0 to 750 psi
1.0K para Imperial Pressure 0 to 1000 psi
1.5K para Imperial Pressure 0 to 1500 psi
2.5K para Imperial Pressure 0 to 2500 psi
3.5K para Imperial Pressure 0 to 3500 psi
5.0K para Imperial Pressure 0 to 5000 psi
32B para Imperial Barometric (Absolute Pressure) 0 to 32 inHg
16B para Imperial Barometric (Absolute Pressure) 16 to 32 inHg
26B para Imperial Barometric (Absolute Pressure) 26 to 32 inHg
025H para Metric Pressure 0 to 25 mbar
070H para Metric Pressure 0 to 70 mbar
170H para Metric Pressure 0 to 170 mbar
350H para Metric Pressure 0 to 350 mbar
001B para Metric Pressure 0 to 1.0 bar
002B para Metric Pressure 0 to 2 bar
3.5B para Metric Pressure 0 to 3.5 bar
007B para Metric Pressure 0 to 7 bar
010B para Metric Pressure 0 to 10 bar
17.5B para Metric Pressure 0 to 17.5 bar
035B para Metric Pressure 0 to 35 bar
050B para Metric Pressure 0 to 50 bar
070B para Metric Pressure 0 to 70 bar
100B para Metric Pressure 0 to 100 bar
175B para Metric Pressure 0 to 175 bar
245B para Metric Pressure 0 to 245 bar
350B para Metric Pressure 0 to 350 bar
32H para Metric Barometric (Absolute Pressure) 0 to 1100 hPa
16H para Metric Barometric (Absolute Pressure) 550 to 1100 hPa
26H para Metric Barometric (Absolute Pressure) 0 to 1100 hPa

(3) Pressure Type seleccionar de:
G para Gage Pressure Ranges 10W to 5.0K or 025H to 350B
A para Absolute Pressure Ranges 005 to 5.0K or 350H to 350B
B para Barometric Pressure Ranges 32B/16B/26B or 32H/16H/26H
V para Vacuum Pressure Ranges 015 to 10W or 001B to 025H
CG para Compound Gage Pressure Ranges 015 to 10W or 001B to025H
SG para Sealed Gage Pressure Ranges 100 to 5.0K or 007 to 350B

(4) Output Signal seleccionar de:
485-5V para RS485 with 0 to 5 Vdc Output
485-I para RS485 with 4 to 20 mA Output

NOTA: No todas las combinaciones pueden no ser válidas, compruebe la hoja de especificaciones para números de parte válidos.