Cesta  |  Contacto  |  Ayuda  |  Envíe un correo  | 
En Chile 800-395-179
Fuera de Chile001-203-978-7240

Explosion Proof / Intrinsically Safe Industrial Pressure Transmitter

PX880

Explosion Proof / Intrinsically Safe  Industrial Pressure Transmitter | PX880

USD$810.00 PX880-015GI

5 años de garantía
  • Explosion Proof FM & CSA Ratings
  • Intrinsically Safe CSA Ratings
  • Miniature Size
  • ±0.25% Accuracy
  • All Welded 316 Stainless Steel Construction
  • Zero & Span Adjustability
  • Full 5:1 Range Turndown
    (on ranges ≥100 psi)
  • 4-20 mA Output

Descripción

The PX880 Series comprises the most compact, durable, accurate, cost-effective, full-featured pressure transmitters available. The 4 to 20 mA output is standard, with a 12 to 48 Vdc power supply.

Designed for stable performance in the toughest environments, with 316 SS welded construction, PX880 transmitters are ideal for use with corrosive media and in hazardous environments.

Both models have FM and CSA Explosion Proof and CSA Intrinsically Safe approvals and meet NACE standards for offshore applications (The PX880-150WCGI, 0-75 to 0-150 inches of water range does not have FM approval, only CSA Intrinsically Safe approval). With the cover retained by a stainless steel chain and no internal jumpers for span turndown, losses due to misplaced or dropped parts are eliminated.

The small size and light weight of both models eliminate any complicated mounting hardware or mechanical supports, which reduces installation time substantially. The integral junction box permits simple field wiring without the need for additional hardware, and adds to the speed and ease of installation.

OPERATION
The heart of the PX880 pressure transmitter is a silicon piezoresistive sensing chip. This miniature microetched semiconductor gives a voltage output proportional to the applied pressure. The chip is isolated from the process media by a stainless steel diaphragm. Silicone oil is used to transmit the process pressure to the sensor.

An amplifier PCB enclosed in a sealed chamber is used to convert the millivolt signal from the sensor to a calibrated 4 to 20 mA transmitter output. Feed-throughs for EMI and RF protection are used between the amplifier board and the terminal housing.

Each transmitter is tested over both pressure and temperature ranges. A compensator circuit is used to bring the output of the sensor into specification. After compensation, every transmitter is tested a second time for pressure and temperature effects to ensure that it meets performance specifications. The transmitters are calibrated to the upper ranges listed in the order box, but end users can recalibrate them to different ranges. Recalibration is done via 3 screw potentiometers inside the transmitter’s head. Recalibrating to any range between the 2 listed for a particular sensor can be accomplished with a known pressure source.

The PX881 is flush diaphragm pressure transmitter, designed to mount flush against process media and to prevent any media particles from collecting at the diaphragm.



SPECIFICATIONS
Excitation: 12 to 40 Vdc with reverse polarity protection
Output: 4 to 20 mA (2 wire)
Accuracy: ±0.2% of calibrated span including linearity, hysteresis and repeatability
Max Loop Resistance: 600 Ω @ 24 Vdc max Ω = (supply voltage - 12) x 50
Storage Temperature: -40 to 100°C (-40 to 212°F)
Operating Temperature: -40 to 100°C (-40 to 212°F)
Compensated Temperature: -29 to 82°C (-20 to 180°F)
Thermal Effects: Zero and span combined ±0.02% upper range/°F (30 to 130°F) ±0.032% upper range/°F (-20 to 180°F)
Proof Pressure: 200% upper range
Stability: ±0.5% of upper range for 6 months
Vibration: 0.1% upper limit for 3 g @ 200 Hz
Approvals: FM Explosion Proof for Class 1, 2, 3 Div 1, Groups B, C, D, E, G NEMA 4 enclosure) CSA (Intrinsic Safety for Class 1, 2, 3, Div 1 Groups A, B, C, D, E, F, G; Explosion Proof for Class 1, 2, 3 Div 1, Groups B, C, D, E, F, G Enclosure 4)
Wetted Parts:
PX880: 316 SS
PX881: 316 SS, PTFE gasket and Hastelloy diaphragm
Pressure Port:
PX880: 1/2 NPTF
PX881: Weldolet pipe coupling
Electrical Connection: 1/2 NPTF
Body Material: 316 SS
Cast Head: CF-8M (316 cast SS) with Buna-N O-ring
Fluid Fill: DC 200 silicone oil
Response Time: 20 ms
Weight: 725 g (1.6 lb)

PX880 ½ NPT Series
Dimensions: mm (inches) PX881 Flush Mount Series
Dimensions: mm (inches)
Hacer Pedido(Especifique el Número de Modelo)

Lo que han comprado otras personas: Cuando vea este icono, haga clic sobre él para abrir la lista de productos que otras personas han comprado al adquirir este modelo

Número de parte/Desc.
Cant.
Descripción
Quick Ship
  
PX880-150WCGI
Consultar venta  
Disponible en: 
 
 
Industrial pressure transmitter with 1/2" NPT female fitting and adjustable 0-75 to 0-150 inch of water range
Quick Ship
  
PX880-015GI
USD$810.00
Disponible en: Disponible
 
Industrial pressure transmitter with 1/2" NPT female fitting and adjustable 0-6 to 0-15 psig range
Quick Ship
  
PX880-030GI
USD$810.00
Disponible en: 8 Semanas
 
Industrial pressure transmitter with 1/2" NPT female fitting and adjustable 0-15 to 0-30 psig range
Quick Ship
Haga clic para abrir la lista de productos que otras personas han comprado al adquirir este modeloPX880-100GI
PX880-100GI
USD$810.00
Disponible en: 3 Semanas
 
Industrial pressure transmitter with 1/2" NPT female fitting and adjustable 0-20 to 0-100 psig range
Quick Ship
Haga clic para abrir la lista de productos que otras personas han comprado al adquirir este modeloPX880-300GI
PX880-300GI
USD$810.00
Disponible en: Disponible
 
Industrial pressure transmitter with 1/2" NPT female fitting and adjustable 0-60 to 0-300 psig range
Quick Ship
Haga clic para abrir la lista de productos que otras personas han comprado al adquirir este modeloPX880-1KGI
PX880-1KGI
USD$810.00
Disponible en: Disponible
 
Industrial pressure transmitter with 1/2" NPT female fitting and adjustable 0-200 to 0-1000 psig range
Quick Ship
Haga clic para abrir la lista de productos que otras personas han comprado al adquirir este modeloPX880-3KGI
PX880-3KGI
USD$810.00
Disponible en: Disponible
 
Industrial pressure transmitter with 1/2" NPT female fitting and adjustable 0-600 to 0-3000 psig range
Quick Ship
  
PX880-5KGI
USD$810.00
Disponible en: 8 Semanas
 
Industrial pressure transmitter with 1/2" NPT female fitting and adjustable 0-1000 to 0-5000 psig range
Quick Ship
  
PX880-X15GI
USD$810.00
Disponible en: 8 Semanas
 
Industrial pressure transmitter with 1/2" NPT female fitting and adjustable 3-15 psig range
Quick Ship
  
PX881-015GI
USD$985.00
Disponible en: 6 Semanas
 
Industrial flush mount pressure transmitter with adjustable 0-3 to 0-15 psig range (PX881-CPL required)
Quick Ship
  
PX881-030GI
USD$985.00
Disponible en: 8 Semanas
 
Industrial flush mount pressure transmitter with adjustable 0-6 to 0-30 psig range (PX881-CPL required)
Quick Ship
  
PX881-100GI
USD$985.00
Disponible en: 8 Semanas
 
Industrial flush mount pressure transmitter with adjustable 0-20 to 0-100 psig range (PX881-CPL required)
Quick Ship
  
PX881-300GI
USD$985.00
Disponible en: 8 Semanas
 
Industrial flush mount pressure transmitter with adjustable 0-60 to 0-300 psig range (PX881-CPL required)
Quick Ship
  
PX881-CPL
USD$36.44
Disponible en: 8 Semanas
 
1 1/2" Weld on coupling (Required for PX881 Models)
Accessories
Quick Ship
  
PX881-CPL
USD$36.44
Disponible en: 8 Semanas
 
38.1 mm (1.5”) pipe coupling
Quick Ship
  
PX881-PLUG
USD$36.44
Disponible en: 8 Semanas
 
Plug
Todos los productos en este sitio se muestran en la moneda de EE.UU.
NOTA: Units are shipped calibrated to highest range.
PX881 flush diaphragm models requires PX881-CPL weld on coupling.
Ejemplo de pedido: (1) PX881-030GI is a flush mount Transmitter with a 0-15 to 0-30 psig range, USD$985.00  plus (1) PX881-CPL weld on coupling for PX881, USD$36.44, USD$985.00 + 36.44 = USD$1,021.44