Cesta  |  Contacto  |  Ayuda  |  Envíe un correo  | 
En Chile 800-395-179
Fuera de Chile001-203-978-7240

Self-Adhesive Patch Sensors

SA2F-TH and SA2C-TH Series

Self-Adhesive Patch Sensors | SA2F-TH and SA2C-TH Series

Self-Adhesive Patch Sensors

Ver Todas los Modelos Abajo

  • 2252Ω, 5 kΩ or 10 kΩ 25°C (77°F) Elements
  • Accuracy ±0.1°C Between 0 and 70°C
  • Operating Range: -30 to 100°C (-22 to 212°F)
  • Self Adhesive Foil Backing for Faster Response Time
  • Resistant to a Variety of Chemicals and Oils
  • A Range of Cable Termination Options Available
  • 2 Styles Available for Flat (SA2F-) or Curved (SA2C-) Surfaces

Descripción

These temperature sensors are available in two patch styles, for either curved or flat surfaces. The integral thermistor element is mounted flush with the self-adhesive surface of the patch, which is foil backed to minimize response times.
Hacer Pedido(Especifique el Número de Modelo)
Número de parte/Desc.
Cant.
Descripción
Quick Ship
SA2F-TH-44033-40
Consultar venta  
Disponible en: 
 
 
Resistance; 2252 ohms @ 25°C, Interchangeability; ±0.1°C, Wire Length; 1 m (40"), stripped leads
Quick Ship
SA2F-TH-44034-40
Consultar venta  
Disponible en: 
 
 
Resistance; 5000 ohms @ 25°C, Interchangeability; ±0.1°C, Wire Length; 1 m (40"), stripped leads
Quick Ship
SA2F-TH-44031-40
Consultar venta  
Disponible en: 
 
 
Resistance; 10,000 ohms @ 25°C, Interchangeability; ±0.1°C, Wire Length; 1 m, (40"), stripped leads
Quick Ship
SA2C-TH-44033-40
Consultar venta  
Disponible en: 
 
 
Resistance; 2252 ohms @ 25°C, Interchangeability; ±0.1°C, Wire Length; 1 m (40"), stripped leads
Quick Ship
SA2C-TH-44034-40
Consultar venta  
Disponible en: 
 
 
Resistance; 5000 ohms @ 25°C, Interchangeability; ±0.1°C, Wire Length; 1 m (40"), stripped leads
Quick Ship
SA2C-TH-44031-40
Consultar venta  
Disponible en: 
 
 
Resistance; 10,000 ohms @ 25°C, Interchangeability; ±0.1°C, Wire Length; 1 m (40"), stripped leads
Todos los productos en este sitio se muestran en la moneda de EE.UU.
NOTA: Notes: For longer cable length, change “-40” with required length (in inches) to end of the model number for an additional cost per foot. For 1/4" jack plug, add “-PP” to the model number for an additional cost.

Generador de Número de Parte

Generador de Número de parte
Descripción de Opciones:


(1) Mounting Type seleccionar de:
F para Flat Surface
C para Curved Surface

(2) Thermistor Selection seleccionar de:
44033 para 2252 ohms at 25C
44034 para 5000 ohms at 25C
44031 para 10000 ohms at 25C

(3) Lead Length seleccionar de:
40 para 40 inches
80 para 80 inches
120 para 120 inches
NOTA: No todas las combinaciones pueden no ser válidas, compruebe la hoja de especificaciones para números de parte válidos.