Cesta  |  Contacto  |  Ayuda  |  Envíe un correo  | 
En Chile 800-395-179
Fuera de Chile001-203-978-7240

Standard Threaded Thermowell for 3/8 Inch Diameter Elements

SERIES 385L

Standard Threaded Thermowell for 3/8 Inch Diameter Elements | SERIES 385L

Standard Threaded Thermowell for 3/8 Inch Diameter Elements

USD$29.95 3/4-385L-U21/2-BRASS

  • Available in Carbon Steel and Stainless Steel
  • Standard Insertion Lengths from 2 1/2 to 19 1/2 Inches
  • 3/4 Inch and 1 Inch External Diameter

Descripción

Application:
Standard length, 3/8" stem, bimetal thermometers. #14 gage thermocouple elements. Armored liquid-in-glass test thermometers. Other temperature-sensing elements having .377 in. maximum diameter.

Connection Size:
3/4" NPT and 1" NPT are standard. Other thread sizes are available upon request.

Materials:
Brass (ASTM B-16); Carbon Steel (C-1018); Stainless Steel A.I.S.I. 304 & A.I.S.I. 316; Monel. Wells are also available in special materials; prices on request.


Series 385L—Lagging Extension Type
All dimensions in inches.

* NPSM internal pipe thread will accept both NPT and NPS male threads.


External Thread
P
Model No.Lag. Ext.
T
Elem. Lgth.
A
Insert. Lgth.
U
3/4" NPT3/4-385L-U 2 1/2
        -U 4 1/2
        -U 7 1/2
        -U10 1/2
        -U13 1/2
        -U19 1/2
2
3
3
3
3
3
6
9
12
15
18
24
2 1/2
4 1/2
7 1/2
10 1/2
13 1/2
19 1/2
1" NPT1-385L-U 2 1/2
        -U 4 1/2
        -U 7 1/2
        -U10 1/2
        -U13 1/2
        -U19 1/2
2
3
3
3
3
3
6
9
12
15
18
24
2 1/2
4 1/2
7 1/2
10 1/2
13 1/2
19 1/2


Maximum Fluid Velocity—feet per second
Well Type Material Insertion Length – “U”
2 1/2 4 1/2 7 1/2 10 1/2 13 1/2 16 1/2 19 1/2 22 1/2
3/4" - 385S
and
3/4" - 385L
Brass290 (145)150 (80)54.1 (48)27.616.711.186
Carbon Steel326 (260)192 (144)69.535.420.514.310.37.7
A.I.S.I. 304 & 316349 (360)19971.936.621.214.810.78
Monel316 (320)189 (178)68.134.820.814107.5
Where single values appear in the velocity tables, these may be considered safe for water, steam, air or gas. In the shorter insertion lengths, consideration is given to the velocity pressure effect of water flowing at higher velocities. The values in parentheses, therefore, represent safe values for water flow, while the unbracketed values may be used for steam, air, gas and similar density fluids.
See 385S Thermowell Page for Pressure-Temperature Ratings
Hacer Pedido(Especifique el Número de Modelo)
Número de parte/Desc.
Cant.
Descripción
Example part numbers are shown below. For additional configurations see the Part Number Builder below this table.
Quick Ship
3/4-385L-U21/2-BRASS
USD$29.95
Disponible en: Disponible
 
Standard Threaded Well, External Thread - NPT 3/4", Insertion Length Dimension 2 1/2", Brass
Quick Ship
3/4-385L-U41/2-304SS
USD$53.29
Disponible en: 2 Semanas
 
Standard Threaded Well, External Thread - NPT 3/4", Insertion Length Dimension 4 1/2", 304 SS
Quick Ship
1-385L-U101/2-CS
Consultar venta  
Disponible en: 
 
 
Standard Threaded Well, External Thread - NPT 1", Insertion Length Dimension 10 1/2", Carbon Steel
Todos los productos en este sitio se muestran en la moneda de EE.UU.

Generador de Número de Parte

Generador de Número de parte
Descripción de Opciones:


(1) External thread - NPT seleccionar de:
3/4 para 3/4 in.
1 para 1 in.

(2) Insertion length dimension seleccionar de:
21/2 para 2 1/2 in.
41/2 para 4 1/2 in.
71/2 para 7 1/2 in.
101/2 para 10 1/2 in.
131/2 para 13 1/2 in.
191/2 para 19 1/2 in.

(3) Material seleccionar de:
304SS para 304 SS
316SS para 316 SS
CS para Carbon Steel
BRASS para Brass
NOTA: No todas las combinaciones pueden no ser válidas, compruebe la hoja de especificaciones para números de parte válidos.