Cesta  |  Contacto  |  Ayuda  |  Envíe un correo  | 
En Chile 800-395-179
Fuera de Chile001-203-978-7240

2-Way Solenoid Valves, Direct Lift, Steam

SV230 Series

2-Way Steam Solenoid Valves Direct Lift, Normally Closed, Brass Valve Body, Epdm Seals | SV230 Series

USD$314.81 SV234

  • Rated up to 145°C (293°F) Steam
  • Rugged NEMA 4 (IP65) Housing
  • Mounts in Any Position
  • Rated for Continuous Duty
  • Ethylene Propylene (EPDM) Seals


Heating and Cooling, Commercial Dish Washing Equipment, Car Washing Equipment, Food Processing, Commercial Laundry Equipment, Bottle Washing, Sterilizing Equipment

The SV230 Series valves are designed for low-pressure steam applications in which the valve must operate when the pressure drop across the valve falls into the 0 to 5 psi range. These valves are able to control steam up to 45 psi at 143°C (290°F). All seals are made of ethylene propylene for compatibility with steam over a wide temperature range and for trouble-free, bubble-tight service.

The SV231 through SV235 are direct-lift valves, which combine the features of a direct-acting valve with those of a pilot operated valve. Because of a flexible link between the solenoid plunger and the diaphragm, the direct-lift valve functions as a direct-acting valve at low pressures and as a pilot-operated valve at high pressures. It is sometimes referred to as a zero delta pressure valve or a hung diaphragm valve.

Operation: Direct lift
Wetted Parts: Brass, Stainless steel, copper, and seal
Medium: Liquid or gases
Max Static Pressure: 5 times max psid
Ambient Temp: -9 to 50°C (15 to 122°F)
Mounting: Pipe mounting, any direction
Power: 22 W, 120 Vac, 50 to 60 Hz, Class H
Hacer Pedido(Especifique el Número de Modelo)
Número de parte/Desc.
Disponible en: 12 Semanas
2-way direct lift valve with 1/4 NPT fitting, 13/64" orifice and EPDM seals
Disponible en: 10 Semanas
2-way direct lift valve with 3/8 NPT fitting, 5/8" orifice and EPDM seals
Disponible en: Disponible
2-way direct lift valve with 1/2 NPT fitting, 5/8" orifice and EPDM seals
Disponible en: 10 Semanas
2-way direct lift valve with 3/4 NPT fitting, 5/8" orifice and EPDM seals
Todos los productos en este sitio se muestran en la moneda de EE.UU.
Ejemplo de pedido: (1) SV232 2-way direct-lift steam valve, NC with a brass body and 5/8" orifice with EDPM seal, USD$290.60
We noticed you are from the US. Visit your local site for regional offers and live support.