Cesta  |  Contacto  |  Ayuda  |  Envíe un correo  | 
En Chile 800-395-179
Fuera de Chile001-203-978-7240

Fine Diameter (0.01 in. - 0.04 in.) Rugged Thermocouple Transition Joint Probes

TJ36 Series - Fine Diameters

Fine Diameter Thermocouple Transition Joint Probes | TJ36 Series - Fine Diameters

Fine Diameter Thermocouple Transition Joint Probes

Ver Todas los Modelos Abajo

  • Diameters as small as 0.25mm (0.010") !
  • Probes Available in E, J, K, N, and T Calibrations
  • 304 SS and Inconel® 600 sheaths
  • Additional Sheaths Available: 310 SS, 316 SS, 321 SS, Hastelloy® X, and Super OMEGACLAD™ XL
  • Type K and N cand be manufactured with OMEGACLAD™ Compacted Mineral Insulation Cable for Long-Lasting Performance in Harsh Conditions
  • Spring Strain Relief Prevents "Pinching" of the Wire
  • 1 m (40") Lead Length, Stripped Leads

Descripción

OMEGA's fine diameter transition joint thermocouple probes provide durability and fast, accurate temperature measurements. Diameters as small 0.25mm (0.010") allow "pin-point" accuracy of measured values while protecting the measurement junction inside the metal sheathing and mineral insualtion of the OMEGACLAD™ cable . The metal transition barrel provides a solid mounting surface and the PFA insulated lead wire is a cost-effective solution for environmental temperatures to 260°C (500°F). For extended life, low drift operation at higher temperatures, choose Super OMEGACLAD™ XL sheathing, available in Type K and N calibrations.

Calibration
ANSI Code
Sheath
Materials
Sheath Dia.
mm (in.)
T/C Junction
Upper Temp.
°C (°F)
Model Number
(See notes, below)
K
CHROMEGA™-
ALOMEGA™
304SS 0.25 (0.010)
0.50 (0.020)
0.80 (0.032)
1.00 (0.040)
500 (932)
700 (1290)
700 (1290)
700 (1290)
TJ36-CASS-010(*)-(**)
TJ36-CASS-020(*)-(**)
TJ36-CASS-032(*)-(**)
TJ36-CASS-040(*)-(**)
Inconel®
600
0.25 (0.010)
0.50 (0.020)
0.80 (0.032)
1.00 (0.040)
500 (932)
700 (1290)
700 (1290)
700 (1290)
TJ36-CAIN-010(*)-(**)
TJ36-CAIN-020(*)-(**)
TJ36-CAIN-032(*)-(**)
TJ36-CAIN-040(*)-(**)
Super
OMEGACLAD™
XL
0.25 (0.010)
0.50 (0.020)
0.80 (0.032)
1.00 (0.040)
600 (1112)
800 (1472)
800 (1472)
800 (1472)
TJ36-CAXL-010(*)-(**)
TJ36-CAXL-020(*)-(**)
TJ36-CAXL-032(*)-(**)
TJ36-CAXL-040(*)-(**)
J
Iron-
Constantan
304SS 0.25 (0.010)
0.50 (0.020)
0.80 (0.032)
1.00 (0.040)
260 (500)
260 (500)
260 (500)
260 (500)
TJ36-ICSS-010(*)-(**)
TJ36-ICSS-020(*)-(**)
TJ36-ICSS-032(*)-(**)
TJ36-ICSS-040(*)-(**)
T
Copper-
Constantan
304SS 0.50 (0.020)
0.80 (0.032)
1.00 (0.040)
260 (500)
260 (500)
260 (500)
TJ36-CPSS-020(*)-(**)
TJ36-CPSS-032(*)-(**)
TJ36-CPSS-040(*)-(**)
Notes: *Specify Junction: (G)rounded, (E)xposed or or (U)ngrounded.
**Specify length in inches: 6 for 150 mm (6 in.), 12 for 300 mm (12 in.),
Super OMEGACLAD™ XL probes (highlighted in yellow) are also available in N calibration; substitute "NN" for CA in Model Number.

View the Thermocouple Accuracy and Color Code charts
Hacer Pedido(Especifique el Número de Modelo)
Número de parte/Desc.
Cant.
Descripción
Quick Ship
TJ36-CASS-040U-6
USD$37.31
Disponible en: 3 Semanas
 
TJ36 Probe (Type K calibration) with 304SS Sheath,1.00 mm (0.040 in.) dia., 150 mm (6 in.) ength, ungrounded tip
Quick Ship
TJ36-CASS-010G-12
USD$57.75
Disponible en: 4 Semanas
 
TJ36 Probe (Type K calibration) with 304 SS Sheath, 0.25 mm (0.010in.) dia., 300 mm (12 in.) length, grounded tip
Quick Ship
TJ36-CAIN-032U-6
USD$37.31
Disponible en: 3 Semanas
 
TJ36 Probe (Type K calibration) with Inconel® Sheath, 0.80 mm (0.032 in.) dia., 150 mm (6 in.) length, ungrounded tip
Quick Ship
TJ36-ICSS-040G-12
USD$35.26
Disponible en: 3 Semanas
 
TJ36 Probe (Type J calibration) with 304 SS Sheath, 1.0 mm (0.040 in.) dia., 300 mm (12 in.) length, grounded tip
Quick Ship
TJ36-CAXL-032U-12
USD$41.40
Disponible en: 3 Semanas
 
TJ36 Probe (Type K calibration) with Super OMEGACLAD™ XL Sheath, 0.80 mm (0.032 in.) dia., 300 mm (12 in.) length, ungrounded tip
Todos los productos en este sitio se muestran en la moneda de EE.UU.
Ejemplo de pedido: (1) TJ36-CAXL-040G-6 Type K Rugged Fine Diameter Thermocouple Transition Joint Probe with PFA Stripped Lead Wire, 1 m (40 inches) length; Super OMEGACLAD™ XL sheath, 1.0 mm (.040 inch) dia., 150 mm (6 inches) length, ungrounded tip, USD$39.35

Generador de Número de Parte

Generador de Número de parte
Descripción de Opciones:


(1) Lead Wire Length seleccionar de:
36 para 36 inches(standard)
CUSTOM para custom length in inches(whole number only up to 600 inches max)

(2) Thermocouple Type seleccionar de:
CA para Type K
CX para Type E
IC para Type J
CP para Type T (Not available with 010 diameter)
NN para Type N (Only available with XL and IN sheath)

(3) Sheath Material seleccionar de:
SS para 304 SS
IN para Inconel®
XL para Super OMEGACLAD™ XL (Only available with Thermocouple Type K and N)

(4) Probe Diameter seleccionar de:
010 para 0.010 in. (0.25 mm)
020 para 0.020 in. (0.50 mm)
032 para 0.032 in. (0.80 mm)
040 para 0.040 in. (1.00 mm)

(5) Junction Type seleccionar de:
E para Exposed
G para Grounded
U para Ungrounded

(6) Length seleccionar de:
6 para 6 in. (150 mm)
12 para 12 in. (300 mm)
CUSTOM para custom length in inches(whole numbers only from 2 to 120 inches)
NOTA: No todas las combinaciones pueden no ser válidas, compruebe la hoja de especificaciones para números de parte válidos.