Cesta  |  Contacto  |  Ayuda  |  Envíe un correo  | 
En Chile 800-395-179
Fuera de Chile001-203-978-7240

Radio Telemetry System for Strain Gages, Thermocouples and Voltage Signals

TX20B

Radio Telemetry System for Strain Gages, Thermocouples and Voltage Signals | TX20B

Ver Todas los Modelos Abajo

1 año de garantía CE RoHS
  • Eliminates Cumbersome Slip Ring Installation
  • Does Not Require FCC License
  • Small Size, Light Weight
  • Wireless Sensor Interface
  • Battery Powered or Induction Powered Models Available

Descripción

OMEGA's TX20B radio telemetry system is ideal for transmitting signals from sensors which are mounted on rotating shafts. The TX20B series miniature transmitters modulate sensor signals from thermocouples, voltage transducers, or strain gage bridge circuits onto a RF carrier and transmit them to a stationary receiver. The RX20B receiver demodulates the signal and converts it into a ±2 volt analog output. Two analog outputs signals are available simultaneously. A wide band output provides frequency response from dc to 1250 Hz. For maximum stability of the signal a filtered output is also available with a 0-10 Hz band width.
TX20B transmitters incorporate a crystal oscillator which is tuned to a specific frequency eliminating the need for tuning by the operator. Transmitter frequencies can be staggered allowing multiple transmitters to be operated in close proximity with no interference. Multi-channel receivers are available.
Transmitters are small enough in size to be taped or strapped to the rotating shaft and can be powered by a 9 V battery. For applications where continuous uninterrupted monitoring is necessary an inductively coupled power supply and transmitter are also available.
The TX20B operates in a band which does not require an FCC license.
Hacer Pedido(Especifique el Número de Modelo)
Número de parte/Desc.
Cant.
RoHS
Descripción
Quick Ship
TX20B-S1
Consultar venta  
Disponible en: 
 
RoHS compliant
0.3 mV/V Strain gage transmitter
Quick Ship
TX20B-S2
Consultar venta  
Disponible en: 
 
RoHS compliant
1.0 mV/V Strain gage transmitter
Quick Ship
TX20B-S3
Consultar venta  
Disponible en: 
 
RoHS compliant
2.0 mV/V Strain gage transmitter
Quick Ship
TX20B-S4
Consultar venta  
Disponible en: 
 
RoHS compliant
3.0 mV/V Strain gage transmitter
Quick Ship
TX20B-E1
Consultar venta  
Disponible en: 
 
RoHS compliant
0.1V Voltage transmitter
Quick Ship
TX20B-E2
Consultar venta  
Disponible en: 
 
RoHS compliant
1.0V Voltage transmitter
Quick Ship
TX20B-E3
Consultar venta  
Disponible en: 
 
RoHS compliant
5.0V Voltage transmitter
Quick Ship
TX20B-E4
Consultar venta  
Disponible en: 
 
RoHS compliant
10.0V Voltage transmitter
Quick Ship
TX20B-J1
Consultar venta  
Disponible en: 
 
RoHS compliant
-17 to 93°C (0 to 200°F) Type J T/C transmitter
Quick Ship
TX20B-J2
Consultar venta  
Disponible en: 
 
RoHS compliant
-17 to 204°C (0 to 400°F) Type J T/C transmitter
Quick Ship
TX20B-J3
Consultar venta  
Disponible en: 
 
RoHS compliant
-17 to 427°C (0 to 800°F) Type J T/C transmitter
Quick Ship
TX20B-J4
Consultar venta  
Disponible en: 
 
RoHS compliant
-17 to 538°C (0 to 1000°F) Type J T/C transmitter
Quick Ship
TX20B-K1
Consultar venta  
Disponible en: 
 
RoHS compliant
-17 to 260°C (0 to 500°F) Type K T/C transmitter
Quick Ship
TX20B-K2
Consultar venta  
Disponible en: 
 
RoHS compliant
-17 to 538°C (0 to 1000°F) Type K T/C transmitter
Quick Ship
TX20B-K3
Consultar venta  
Disponible en: 
 
RoHS compliant
-17 to 816°C (0 to 1500°F) Type K T/C transmitter
Quick Ship
TX20B-K4
Consultar venta  
Disponible en: 
 
RoHS compliant
-17 to 1093°C (0 to 2000°F) Type K T/C transmitter
Accessories (Clamp assemblies)
Quick Ship
TX-ICA-100
Consultar venta  
Disponible en: 
 
RoHS compliant
Clamp assembly for 25.4 (1) shafts, inductive
Quick Ship
TX-ICA-125
Consultar venta  
Disponible en: 
 
RoHS compliant
Clamp assembly for 31.8 (11.4) shafts, inductive
Quick Ship
TX-ICA-150
Consultar venta  
Disponible en: 
 
RoHS compliant
Clamp assembly for 38.1 (11.2) shafts, inductive
Quick Ship
TX-ICA-175
Consultar venta  
Disponible en: 
 
RoHS compliant
Clamp assembly for 44.5 (13.4) shafts, inductive
Quick Ship
TX-ICA-200
Consultar venta  
Disponible en: 
 
RoHS compliant
Clamp assembly for 50.8 (2) shafts, inductive
Quick Ship
TX-ICA-250
Consultar venta  
Disponible en: 
 
RoHS compliant
Clamp assembly for 63.5 (21.2) shafts, inductive
Quick Ship
TX-ICA-300
Consultar venta  
Disponible en: 
 
RoHS compliant
Clamp assembly for 76.2 (3) shafts, inductive
Quick Ship
TX-ICA-400
Consultar venta  
Disponible en: 
 
RoHS compliant
Clamp assembly for 101.6 (4) shafts, inductive
Quick Ship
TX-ICA-500
Consultar venta  
Disponible en: 
 
RoHS compliant
Clamp assembly for 127.0 (5) shafts, inductive
Quick Ship
TX-ICA-600
Consultar venta  
Disponible en: 
 
RoHS compliant
Clamp assembly for 152.4 (6) shafts, inductive
Quick Ship
TX-BCA-100
Consultar venta  
Disponible en: 
 
RoHS compliant
Clamp assembly for 25.4 (1) shafts, Battery Power
Quick Ship
TX-BCA-125
Consultar venta  
Disponible en: 
 
RoHS compliant
Clamp assembly for 31.8 (11.4) shafts, Battery Power
Quick Ship
TX-BCA-150
Consultar venta  
Disponible en: 
 
RoHS compliant
Clamp assembly for 38.1 (11.2) shafts, Battery Power
Quick Ship
TX-BCA-175
Consultar venta  
Disponible en: 
 
RoHS compliant
Clamp assembly for 44.5 (13.4) shafts, Battery Power
Quick Ship
TX-BCA-200
Consultar venta  
Disponible en: 
 
RoHS compliant
Clamp assembly for 50.8 (2) shafts, Battery Power
Quick Ship
TX-BCA-250
Consultar venta  
Disponible en: 
 
RoHS compliant
Clamp assembly for 63.5 (21.2) shafts, Battery Power
Quick Ship
TX-BCA-300
Consultar venta  
Disponible en: 
 
RoHS compliant
Clamp assembly for 76.2 (3) shafts, Battery Power
Quick Ship
TX-BCA-400
Consultar venta  
Disponible en: 
 
RoHS compliant
Clamp assembly for 101.6 (4) shafts, Battery Power
Quick Ship
TX-BCA-500
Consultar venta  
Disponible en: 
 
RoHS compliant
Clamp assembly for 127.0 (5) shafts, Battery Power
Quick Ship
TX-BCA-600
Consultar venta  
Disponible en: 
 
RoHS compliant
Clamp assembly for 152.4 (6) shafts, Battery Power
Quick Ship
{divder}
Consultar venta  
Disponible en: 
 
RoHS compliancy undetermined
Receivers
Quick Ship
RX20B-M
Consultar venta  
Disponible en: 
 
RoHS compliant
Receiver for battery-powered systems
Quick Ship
RX20B-I-M
Consultar venta  
Disponible en: 
 
RoHS compliant
Receiver for induction-powered systems
Quick Ship
SL20
Consultar venta  
Disponible en: 
 
RoHS compliant
Stationary loop for induction-powered systems
Quick Ship
RX24B-BP
Consultar venta  
Disponible en: 
 
RoHS compliant
4-channel plug-in receiver backplane
Quick Ship
RX28B-BP
Consultar venta  
Disponible en: 
 
RoHS compliant
8-channel plug-in receiver backplane
Quick Ship
RX22
Consultar venta  
Disponible en: 
 
RoHS compliant
Plug-in receiver module (battery transmitter)
Quick Ship
RX22-I
Consultar venta  
Disponible en: 
 
RoHS compliant
Plug-in receiver module (induction transmitter)
Todos los productos en este sitio se muestran en la moneda de EE.UU.

Generador de Número de Parte

Generador de Número de parte
Descripción de Opciones:


(1) Input Types and Ranges seleccionar de:
S1 para Strain gage transmitter with 0.3 mV/V input range
S2 para Strain gage transmitter with 1.0 mV/V input range
S3 para Strain gage transmitter with 2.0 mV/V input range
S4 para Strain gage transmitter with 3.0 mV/V input range
E1 para Voltage transmitter with 0.1 V input range
E2 para Voltage transmitter with 1.0 V input range
E3 para Voltage transmitter with 5.0 V input range
E4 para Voltage transmitter with 10.0 V input range
J1 para Type J T/C transmitter with 0-200 °F input range
J2 para Type J T/C transmitter with 0-400 °F input range
J3 para Type J T/C transmitter with 0-800 °F input range
J4 para Type J T/C transmitter with 0-1000 °F input range
K1 para Type K T/C transmitter with 0-500 °F input range
K2 para Type K T/C transmitter with 0-1000 °F input range
K3 para Type K T/C transmitter with 0-1500 °F input range
K4 para Type K T/C transmitter with 0-2000 °F input range
NOTA: No todas las combinaciones pueden no ser válidas, compruebe la hoja de especificaciones para números de parte válidos.