Cesta  |  Contacto  |  Ayuda  |  Envíe un correo  | 
En Chile 800-395-179
Fuera de Chile001-203-978-7240

Nextel Braided Ceramic Very High Temperature and XS Silica Sleeving

XS

Nextel Braided Ceramic Very High Temperature Sleeving | XS

Nextel Braided Ceramic Very High Temperature Sleeving

Ver Todas los Modelos Abajo

RoHS
  • Six Sizes
  • 1/16", 1/8", 3/16", 3/8", 1/4", 1/2" Nominal Inside Diameter
  • Low Thermal Conductivity
  • Silica material sleeving on XS
  • Non-Hygroscopic

Descripción

Nextel 312 is an Alumina-Borica-Silica fiber that is braided without the aid of organic, glass or metal inserts. This sleeving retains strength and flexibility at continuous exposure to 1200°C (2200°F). Short exposures to 1425°C (2600°F) can be tolerated. Most common metals (except molten copper and tin) do not attack the fibers.

Not recommended for use in abrasive environments without the protection of Inconel® overbraiding or a thermowell.

Nextel material is also used to insulate fuel cell interconnect wire see part number XTW-XT-NN-24 for fuel cell application details.

This material is intended for industrial applications only. In addition, Omega does not recommend this material for food, cosmetic, medical, or pharmaceutical use.

XC Nextel sleeving is NOT FOR EXPORT and is sold for USA use Only. Please consider using XS (silica material) as a substitute outside of the USA or consult OMEGA's Temperature Engineering Department.
Hacer Pedido(Especifique el Número de Modelo)
Número de parte/Desc.
Cant.
RoHS
Descripción
XS Silica Material
Quick Ship
XS-116-25
USD$79.28
Disponible en: 5 Semanas
RoHS compliant
25 feet, 1/16 inch, Silica Sleeving
Quick Ship
XS-38-50
USD$336.00
Disponible en: 6 Semanas
RoHS compliant
50 feet, 3/8 inch, Silica Sleeving
Quick Ship
XS-14-100
USD$519.75
Disponible en: 6 Semanas
RoHS compliant
100 feet, 1/4 inch, Silica Sleeving
Todos los productos en este sitio se muestran en la moneda de EE.UU.
NOTA: The length is measured when the sleeving is empty and in a relaxed state.

Generador de Número de Parte

Generador de Número de parte
Descripción de Opciones:


(1) Material Type seleccionar de:
XS para Silica

(2) Sleeve Diameter seleccionar de:
116 para 1/16 inch
18 para 1/8 inch
316 para 3/16 inch
14 para 1/4 inch
38 para 3/8 inch
12 para 1/2 inch

(3) Sleeve Length seleccionar de:
Nada (dejar el campo en blanco) para Unspecified Length (Priced per Ft)
-10 para 10 Ft.
-25 para 25 Ft.
-50 para 50 Ft.
-100 para 100 Ft.
NOTA: No todas las combinaciones pueden no ser válidas, compruebe la hoja de especificaciones para números de parte válidos.